rehabilitation fitness equipment

The Monark Rehab Trainer is especially important for people who have been hospitalized and require rehabilitation based on reliable measuring methods. Its flexibility as an upper or lower body ergometer makes it extremely useful for patients who are confined to wheelchairs or who use walking aids. Likewise it can be used as a cardiovascular upper body workout for paraplegics, amputees or people who suffer from other physical handicaps. Thanks to its reliable measuring methods the Monark Rehab Trainer is an excellent aid to recovery after injury or longterm illness.

SPECIAL FEATURES
• The unit can be calibrated.
• Graduated scale in Watts, showing the workload at 50 r/min.
• Electronic readouts of pedal r/min, total pedal revolutions and time.
• Crank arms are individually adjustable both horizontally and vertically.
• Individual crank height adjustment.
• Control knob for adjustment of brake force.

Monark Ergomedic 828 E is the successor to the 818 E. The bicycle has a new softer design, a completely housed flywheel and strengthened frame. A new electronic instrument shows effective output in watts and heart rate using telemetry. The Monark pendulum balance ergometer is the world’s most used test cycle for fitness testing at work.

TECHNICAL DETAILS
Width 530 mm (21") at handlebar.
Width 460 mm (18") at support tubes.
Length 1120 mm (44").
Height 890-1130 mm (35-44,5") at handlebar.
Height 800-1120 mm (31,5-44") at seat.
Weight 52 kg (114,5 lbs)
Max userweight 125 kg (275 lbs)

Monark 839 E is one of the world's most accurate cycle ergometers. It is especially used for fitness assess-ment and stress testing, as well as in research, sports medicine and rehabilitation. Computerized with removable control unit, program-med with Åstrand, Bruce, YMCA, Naughton, Ramp, Incremental amongst others, plus target heart rate adjusted workload. Individual exercise protocols can be programmed and stored. Heart rate is monitored with chest belt of telemetry type. Provides a constant workload independant of pedal speed. Easy to calibrate both mechanically and electronically.

TECHNICAL DETAILS
Width 530 mm (21") at handlebar.
Width 460 mm (18") at support tubes.
Length 1150 mm (45").
Height 760-1135 mm (30-45") at handlebar.
Height 800-1120 mm (31,5-44") at seat.
Weight 56 kg (123 lbs)
Max userweight 125 kg (275 lbs)

• Multi press station
• Leg press/calf press station
• Perfect pec station
• Lat pull down/high pulley station
• Ab Crunch/mid pulley station
• Leg extension/leg curl station
• Seated row/low pulley station
• Dual 210lb alloy steel weight stacks
• Durafirm pads
• Weight stack shrouds
• Warranty - Lifetime frame, 4 years parts & 1 year labour

Designed to enable wheelchair patient and carer to be elevated to a safe working height for attention to lower limbs without bending/stooping.

Featuring easy foot operation for hydraulic lift with drop down corner stands for extra stability.

Examples of use include plastering lower limbs or chiropody

Dimensions:
220cm H x 150cm W x 150cm D
U.L. Weight 150kg LIFT 70cm

Available in one-section or two-section designs. Sturdy, metal framed and chip resistant. Upholstered in the finest quality flame retardant material. Available in a variety of styles and generous 70cm widths.

Ideal for use in physio departments, general consulting rooms or sports centres.

Dimensions:
180cm L x 70cm W x 80cm H

This super smooth Hi Low Pulley system allows for all exercise movements from 20cm to 180cm without cable adjustments. Weightstack is pin select in protective column. Contoured handrail and all accessories are included.

Dimensions:
220cm H x 140cm W x 65cm D
Weight 210kg

A metal frame mounted on a non slip platform. The frame uprights are marked with a scale in millimetres together with sliding indicators and strings to allow correct body alignment.

Additionally the frame cross bar has a plumb line to ensure full perpendicularity.

The platform may be rotated and has an automatic positioning device.

Dimensions:
200cm H x 90cm W x 70cm D

Robust single or double steps manufactured to a very high quality with non-slip surfaces

Dimensions:
Single step 38cm L x 24cm W x 17cm H
Double step 38cm L x 50cm W x 34cm H

Sturdy and safe parallel bars offering excellent stability and patient security. Coated in wipe clean polyester powder coat and independently ajustable from a minimum heigh of 69cm to a maximum height of 100cm in 7 increments. They fold flat for easy storage

Dimensions:
90cm W x 232cm L x 69-100cm H
Width between rails 61cm
Weight 35kg
Alternative sizes on request eg 5m long
Lightweight folding aluminium also available on request.

Made from tubular steel and mounted onto swivel-type castors - two locking. Easy to manoeuvre with adjustable mirror panel.

Dimensions:
Mirror - 120cm H x 36cm W
Overall 160cm H x 50cm W x 55cm D
Weight 20kg

• Table tilts from horizontal to 85 degrees
• Foot plate with four position adjustment
• Removable head sections
• One section has wide nose hole
• Three wide straps for patient support
• Adjustable writing table
• Hand control switch for tilt operation
• Standard colours: white base - black or grey vinyl
• Castors for mobility

Dimensions:
Overall length 180cm
Width of body section 45cm
Length of body section 95cm
Width of removable head sections 17cm
Height of table in horizontal position 75cm

These steps have three risers on one side and four on the other side, each side having a different step height of 16cm and 12cm. The twin handrails are adjustable in height by positive lock pins.

Dimensions:
77cm W x 216cm L x 60cm H
Weight 70kg

A solidly constructed unit made with white melamine sides and a steel frame. Each step is carpeted to provide a natural feel and appearance. The steps have three 20cm high risers on one side and four 15cm high risers on the other. The unit has a uniform step width of 67cm to simulate a domestic environment. The twin handrails are adjustable in height.

Dimensions: 160cm W x 125cm L x 150cm H
Weight 90kg

A wide range of standard and special size suspension frames available exclusively from 'The Sterling Series' range. Thse frames are made from epoxy coated mild steel with 4.0mm steel wire mesh welded in 5cm squares. There are 3 types of mounting bracket available so that the frames may be attached to walls or coilings. Each frame is supplied with a full set of brackets and fixing instructions.

These frames are normally fixed by building contractors or hospital engineers and full fixing instructions can be supplied on request. A wide range of special sizes of both frames and hangers cna be manufactured to specific instructions.

Quotations available on request.

A selection of versatile fixed position or mobile tabouret stools, upholstered in washable, flame-retardant vinyl material, with easily adjustable gas-spring height adjustment.